The CLEANFlare solution represents a revolutionary new approach to flare stack monitoring offering a more precise and effective means to evaluate and study flare health. CLEANFLare uses an array of optical sensors at different wavelengths, as well as artificial intelligence, to inspect the flame and its quality. The system continuously learns normal behavior and adjusts its output to accommodate different conditions (i.e., day, night and different weather). CLEANFlare monitors flare shape, color, motion and temperature from various angles, and continues to deliver accurate readings and analyses when the flare is in direct line with the sun, under all inclement atmospheric conditions and when the CE of the flare is relatively low.

Furthermore, CLEANFlare stores up to 7 years of video (watermarked), assisting clients comply with inspection and auditing requirements, and fulfills the need for 99.99% system uptime. The storage system is SSD with a RAID 5 architecture and the storage, monitoring and control are fully redundant without a single point of failure.

CLEANFlare is an extremely economical solution, located remotely from stack and installed in accordance with the regulations as defined in Class I Division 2 of the IEC 60079. The systems installation, configuration, operation and maintenance require absolutely no factory downtime.


Unlike pyrometers, ionization spectrometers, UV flame detectors and thermal camera solutions, CLEANFLare operates when the flare is in direct line with the sun, under all inclement atmospheric conditions and when the CE of the flare is relatively low.


Unfortunately, federal regulators are concerned with regards to compliance and stories of long periods of poor weather or extreme, blinding sun are generally not of any particular interest to them. Unencumbered by regular periods of downtime due to the position of the sun and irregular weather, CLEANFlare is free to offer accurate measurements and around-the-clock flare monitoring.


CLEANFlare is an extremely economical, remote solution requiring no factory downtime to install, configure, operate or maintain. Furthermore, the solution works which translates into improved flare stack function and a decreased likelihood of unwanted regulatory interaction.

The CLEANFlare Flare Stack Monitoring System is a revolutionary, AI-based, pilot flame and flare monitoring system designed for use with ground-level, elevated and offshore flare stacks for the oil, natural gas and chemical industries as well as landfills. This remarkably robust and accurate monitoring and control system uses multi-spectral imagers that autonomously, continuously and accurately monitor the health of a flare in real-time and sends control feedback to the production line for flame quality improvement.

Unlike other flare stack monitoring systems, CLEANFlare maintains its heightened levels of accuracy even when the flare is in direct line with the sun or when subjected to high winds and inclement weather. The solution is installed remotely from the flare stack, does not interfere with everyday flare operation, requires little to no maintenance and self-configures so it is extremely efficient and economical.

CONTACT:    Phone: +44 (0) 203 769 0482     Fax: +44 (0) 118 927 2307

Autonomous Real-Time Monitoring

Allow organizations compliance with environmental and safety regulations


Not Effected by Sun, Wind or Inclement Weather

Installed remotely from flair

Reduce energy, oxygen and steam loss

CLEANFlare Flare Stack Monitoring System Solution

CLEANFlare advantage

Real time feedback and control